Troubleshooting Guide - FarSync WAN T-Series - Linux

Problem Symptom	Possible Cause(s)	Action
The interface won't come up on Boot	Drivers not loaded	Check that the LED's are green on the FarSync card. If they are not green check the following.
The interface won't come up on Boot	ONBOOT=no	Check that the ONBOOT parameter is set to Yes in the ifcfg-sync0 file.

Additional possible interface enabling issues when using the Generic HDLC interface (kernel versions 2.4.13 and above only)

Last updated: 29 Nov 2001